1.Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
Designing and laying out new electrical systems.
Creating system models and simulations.
Testing new systems and making design changes if needed.
Producing necessary design reports and documentation.
Assisting in the manufacture of new electrical systems.
1.Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
Provide assistance in creating electrical designs, schematics, and layouts, collaborating with senior engineers to contribute to project development.
Develop problem-solving skills by assisting in identifying and resolving technical issues related to electrical designs and systems.
Design: Collaborate with other engineers, architects, and designers to ensure the design of the HVAC system meets the needs of the project.
Planning: Plan the placement of pipework, ducts, and control panels.
Installation: Install HVAC components.
Maintenance: Perform quality checks and carry out maintenance.
Should have working knowledge on AutoCAD.
Knowledge in designing plumbing systems and distribution of water systems
knowledge on designing storm water drainage systems considering requirement of roof rain water down take pipes, sub-soil drainage, basement drainage and external landscape drainage.
The Electrical Design Engineer will be responsible for conceptualizing, designing, and implementing electrical systems and components for various projects, ensuring compliance with industry standards and project requirements.
Develop detailed electrical designs, specifications, and schematics for new and existing products, considering factors such as safety, reliability, and cost-effectiveness.
Ensure all electrical designs adhere to relevant industry standards, codes, and regulatory requirements, and participate in the certification process as necessary.
Capable to work effectively as a team of Design Engineers/Drafting team.
?Meticulous in Basic / concept Design & Engineering and also can interplay with project teams, consultant/Customer &
Vendors.
?Sector specific knowledge in different applications like Pharma, Food & other clean room applications.
Capable to work effectively as a team of Design Engineers/Drafting team.
?Meticulous in Basic / concept Design & Engineering and also can interplay with project teams, consultant/Customer &
Vendors.
?Sector specific knowledge in different applications like Pharma, Food & other clean room applications.
Responsibilities:
The air conditioning technicians install, inspect, maintain, and repair air conditioner.
Ventilate equipment and controls making sure they operate efficiently and continuously.
Perform regular maintenance work on cooling units.
Diagnose electrical and mechanical defects and malfunctions.
Responsibilities:
The air conditioning technicians install, inspect, maintain, and repair air conditioner.
Ventilate equipment and controls making sure they operate efficiently and continuously.
Perform regular maintenance work on cooling units.
Diagnose electrical and mechanical defects and malfunctions.
1.Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
1.Estimating Heat loads and preparing of HVAC design drawings.
2.Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
Provide assistance in creating electrical designs, schematics, and layouts, collaborating with senior engineers to contribute to project development.
Develop problem-solving skills by assisting in identifying and resolving technical issues related to electrical designs and systems.
Learn and apply industry standards, codes, and regulations to ensure that all electrical engineering activities meet compliance requirements.
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
Responsibilities:
The air conditioning technicians install, inspect, maintain, and repair air conditioner.
Ventilate equipment and controls making sure they operate efficiently and continuously.
Perform regular maintenance work on cooling units.
Diagnose electrical and mechanical defects and malfunctions.
Plumbing Design Engineer
The Role of Plumbing Design Engineer is to Perform Following Activities
Taking the Scope of Client and His Requirements
Performing Design Related to
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
Create technical drawings: The HVAC draftsman uses computer-aided design (CAD) software
to create technical drawings and schematics for HVAC systems, including ductwork, piping,
and equipment layouts.
Coordinate among all services without clashes.
OR (Order Request) issue & PO (Purchase Order) review for all major HVAC equipments like AHUs, MAUs, FCUs, CRAC UNITS, and SUPPLY & EXHAUST FANS. OR issue & PO review for Dampers, Sound Attenuators, Louvers, Grills and diffusers, valves, Gauges, chilled and condensor water piping & fittings.
Conduct regular inspections of electrical installations on construction sites to ensure compliance with design specifications, safety standards, and local regulations.
Oversee the installation and wiring of electrical systems, ensuring that work is executed according to approved plans and within the designated timeframe.
Innovation: Imaging, piloting and spreading new ways to save energy, serve our clients, manage our team and spread awareness in pursuit of our Mission and Vision.
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes
Act as a company representative while negotiating contracts and supplier policies. You’ll also be expected to act as a liaison with our suppliers.
Oversee personnel actions related to selling, purchasing, distributing and equipping our clients on a constant basis.
Work with our financial analyst to review and complete our annual budget and update our monthly estimates as necessary.
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
1 Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
Electrical Execution/Site/Project Engineer
Conduct regular inspections of electrical installations on construction sites to ensure compliance with design specifications, safety standards, and local regulations.
Oversee the installation and wiring of electrical systems, ensuring that work is executed according to approved plans and within the designated timeframe.
Implement quality control measures to verify the quality of electrical work, troubleshoot issues, and collaborate with the construction team to address any deviations.
Conducting routine maintenance on heating and cooling systems.
Diagnosing and repairing malfunctioning equipment, such as refrigeration systems, air conditioning units, and heating pumps.
Performing installations of new heating and cooling systems.
Maintaining accurate records of equipment repairs and maintenance.
Conduct market research to identify selling possibilities and evaluate
customer needs
Actively seek out new sales opportunities through cold calling,
networking and social media
Set up meetings with potential clients and listen to their wishes and
concerns
Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
Site Engineering - CHW, VRF, DX, Ventilation system projects, etc.
Client co-ordination, Billing, Vendor management, Material Management, Projects Documentation, etc
1.Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
Work with customers and team to provide technical support, resolve issues, and monitor to get site assembly operations with best quality.
Manage, develop, and lead HVAC service staff by recruiting, interviewing, hiring, training, and reviewing the performance of all staff employees.
Define the KRAs of the employees to gauge their performance periodically.
Heating, ventilation, and air conditioning (HVAC) Dy. Service Manager/Service managers’ responsibilities include leading their technicians who install and fix the units, ensuring customer satisfaction, training new employees, and responding to service calls. They typically spend at least a portion of their time at customers’ end to perform necessary HVAC services; this may include working on the outside and the inside of the site.
Enquiry Generation through Customer visits, participation in Exhibitions, interacting with Industry
personnel
?Responding to Enquiries received through phone, email, customer referrals, industry referrals
?Submission of Techno – Commercial Offer
?Demonstration of the Tools & Machines at Customers premises or in the office
?Following up with Customer by Phone, Email and Direct Visit
Site Engineering - CHW, VRF, DX, Ventilation system projects, etc.
Client co-ordination, Billing, Vendor management, Material Management, Projects Documentation, etc
Site visit to attend meeting with client or PMC
Project execution and drawing clarification or modification as desired by customer
Material procurement and follow up with HO or supplier
Testing and commissioning the site and handover building
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
Site visit to attend meeting with client or PMC
?Project execution and drawing clarification or modification as desired by customer
?Material procurement and follow up with HO or supplier
?Testing and commissioning the site and handover building
Site visit to attend meeting with client or PMC
?Project execution and drawing clarification or modification as desired by customer
?Material procurement and follow up with HO or supplier
?Testing and commissioning the site and handover building
?Soft copy of measurement or DC copy shared to HO and submit the hard copy to the
client
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
Site Engineering - CHW, VRF, DX, Ventilation system projects, etc.
Client co-ordination, Billing, Vendor management, Material Management, Projects Documentation, etc
Responsible for Complete Execution of Multiple Projects
Understanding Client Requirements, Technical Specs & Measurements
All project activities from Planning Scheduling
Understanding of Estimation. Working with design team
1. Generating Qualified Leads
2. Client visits , Site visits, Understanding Client Requirements, Technical Specs & Measurements
3. Do company sales presentations
4. Meeting and registering brand with MEP Consultants
5. Working with estimation team to give quotations, Purchase Order Followup
Understanding end user needs via telephone or site visit
To visit the site by a person to inquire about the needs and collect the required data at the site to work out the project.
Do design/ engineering calculations, estimation part, and finally freeze the techno commercial offer.
Guiding the Application Engineers regarding the Enquiries.
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
The IT Admin - Non SAP plays a critical role in managing and supporting the non-
SAP IT infrastructure and systems within the organization. This role is responsible
for ensuring the reliability, security, and efficiency of the non-SAP IT environment,
which may include hardware, software, networking, and user support.
Account Payable (Procure to Pay Cycle)
?Certification - Hard Copy of Invoice against PO and Supporting Documents.
?GST, TDS & Statutory Knowledge.
?Posting the invoice in SAP by adjusting advance, retention and others.
?Effective communication between internal team, vendors and customer to resolve dispute.
Plumbing Design Engineer
The Role of Plumbing Design Engineer is to Perform Following Activities
Taking the Scope of Client and His Requirements
Performing Design Related to
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
Work with customers and team to provide technical support, resolve issues, and monitor to get site assembly operations with best quality.
Manage, develop, and lead HVAC service staff by recruiting, interviewing, hiring, training, and reviewing the performance of all staff employees.
Providing technical, organizational and supervisory assistance in the plumbing projects
Managing workforce, material and tools management
Undertaking quality and inspection checks of plumbing systems and connections
Monitoring the work environment to maintain health and safety requirements
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
Maintain the Drawings at site with current level of Revision.
?Handover the Contractor copy of the drawing to contractor
?Plan for the fittings and material required for work.
?Plan daily work targets for the contractor.
?Supervise the works performed by contractors
Electrical Design Engineer
Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
Troubleshoots, maintains, modifies and repairs heating, ventilating and air conditioning systems and equipment including, reciprocating chillers, 225ton and 190 ton rotary screw chillers, heat exchangers, fans and fan motors, pumps and pump motors, electric and pneumatic controls, and associated safety, over current and other equipment protection devices ensuring that they operate at peak efficiency and conserve energy usage
Responsible for creating, installing, maintaining, troubleshooting, and repairing electrical equipment. Should be able to handle wiring, lighting, and control systems in factories, homes, buildings, and job sites.
use AutoCAD software to create, edit, and modify detailed 2D and 3D drawings and designs. The drawings and designs created by AutoCAD designers are used in a variety of industries, such as architecture, engineering, construction, manufacturing, and product design.
Should have working knowledge on AutoCAD.
Knowledge in designing plumbing systems and distribution of water systems
knowledge on designing storm water drainage systems considering requirement of roof rain water down take pipes, sub-soil drainage, basement drainage and external landscape drainage.
Maintain the Drawings at site with current level of Revision.
?Handover the Contractor copy of the drawing to contractor
?Plan for the fittings and material required for work.
?Plan daily work targets for the contractor.
?Supervise the works performed by contractors.
Conduct market research to identify selling possibilities and evaluate
customer needs
Actively seek out new sales opportunities through cold calling,
networking and social media
Set up meetings with potential clients and listen to their wishes and
concerns
1.Commissioning of chillers and HVAC system
2. Repairing of all type of HVAC equipment.
3. Customer follow-ups and meetings according to schedule.
4. Team management & coordination with Service coordinator for their moments
and for any requirements like parts etc.
Ensure compliance with occupational health and safety guidelines, advises on safety topics, conducts risk assessments, and enforces preventative measures to create a safe workplace.
Innovation: Imaging, piloting and spreading new ways to save energy, serve our clients, manage our team and spread awareness in pursuit of our Mission and Vision.
HVAC SERVICE ENGINEERS :
Job description:
1.Commissioning of chillers and HVAC system
2. Repairing of all type of HVAC equipment.
3. Customer follow-ups and meetings according to schedule.
4. Team management & coordination with Service coordinator for their moments
and for any requirements like parts etc.
5. Weekly meeting with Team about concerns like safety, site audits & backlogs.
6. Update to service Manager & coordinator for the monthly plan.
Duties/Responsibilities:
Installs and repairs electrical wiring, systems, and fixtures in buildings. Installs conduits and pipes to house electrical wires and cables. Ensures piping complies with electrical codes. Installs circuit breakers and other electrical hardware and connects wiring to them.
Innovation: Imaging, piloting and spreading new ways to save energy, serve our clients, manage our team and spread awareness in pursuit of our Mission and Vision.
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
Conduct market research to identify selling possibilities and evaluate
customer needs
Actively seek out new sales opportunities through cold calling,
networking and social media
Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
Create accurate, detailed technical plans for electrical systems using computer-aided design programs to convert specifications and design information from engineers into schematics and blueprints
Collect, study and combine rough sketches and initial design ideas from engineers into coherent technical drafts for further study and review by project managers.
1.Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
Should have working knowledge on AutoCAD.
Knowledge in designing Electrical distribution such as designing Internal lighting systems, power systems, ups systems etc.
Preparation of Lighting, Earthing, Power & Cable Tray Layouts, Substation Equipment Layout.
Preparation of Single Line Diagrams.
Good written and verbal communication.
Meeting with client/ Consultant, site study with Architect, Client, PMC &Complete Project Design ,Heat Load Preparation,
Equipment selection, drawing preparation & approval from client/ Consultant /PMC/Architect within stipulated time
Submission & Approval of all Technical Submittals from Client/consultant. Meeting Architects, PMCs, Consultants.
Support to Sales team to book Design & Build projects by preparing BOQ & engineering drawings etc
Project Quantity Estimation, Preparation of Variation Statement with backup data & rate analysis for extra items,
2+ years of hands down working central AC plant drafting
Able to Prepare the HVAC Shop Drawings and Co-ordination layout .
Ability to understand and read the tender documents, specs, drawings
BE, BTech, Post diploma, Diploma qualification
Ability to converse in local language + English & Hindi – preferable
Manage Execution at various sites with exp of HVAC &VRF Systems
Have worked and managed HVAC sites like ducting, piping etc
Coordinate with client and vendors
Have managed labour and contractors
Have understanding of autocad drawings
Execute as per approved Design
Get final measurement certifications
Site Engineering - CHW, VRF, DX, Ventilation system projects, etc.
Client co-ordination, Billing, Vendor management, Material Management, Project Documentation, etc
Site Engineering - CHW, VRF, DX, Ventilation system projects, etc.
Client co-ordination, Billing, Vendor management, Material Management, Projects Documentation, etc
Creating designs for electrical systems based on engineering specifications and industry standards, using computer software applications such as AutoCAD or ETABS
Conducting surveys of existing facilities to determine the nature of electrical problems or issues that may need to be addressed during construction
Drafting preliminary drawings of electrical systems such as wiring diagrams and floor plans showing where electrical outlets will be placed in a building
Coordinating with architects and other designers to ensure that designs meet all applicable electrical codes and regulations
Prepare the HVAC Shop Drawings and MEP Co-ordination layout
Prepare the Fresh air & Exhaust Air Schematic and Chilled water Schematic Layout
Preparation of detail BOQ
Preparation of coordination drawing internal and external site coordination drawing
Preparation of plant room coordination drawing
Preparation of building duct work drawings
Develop construction drawings utilizing AutoCAD MEP in 3D
Provide program management to support department milestone activities Identify current model quality and value up ideas support adoption
Identifies, investigates, and recommends improvements in products, systems, or processes to improve the application or operation
Develop detailed designs from the schematic designs for medium/large projects and develop schematic for small to medium projects
Shall check and reviews of work done by self
Able to present their technical work
Managing one’s own time
Serves as HVAC Supervisor and will be responsible for all installation, maintenance, and repair of heating, ventilation, and air conditioning units and associated air handling, chilled water distribution, and environmental control systems. Incumbent plans individual jobs and long-term work operations, develops a preventive maintenance program, and controls the quality of repair work. Responsibilities also include designing smaller air-conditioning systems, designing modifications to existing systems,
Coordinate with Trane manufacturing locations order requirements and shipping
Coordinate with Transportation Companies for deliveries
Troubleshoot with Customers and Technicians
Work Closely with Outside Account Managers
Coordinate with Service department on start-up and warranty
Coordinate with Trane Parts Center
Surveying sites ahead of fitting heating, ventilation or air conditioning systems
Planning the placement of pipework, ducts and control panels
Installing HVAC components
Performing quality checks to ensure systems are working efficiently and safely
Carrying out maintenance on HVAC systems
Finding and fixing faults
Helping customers to reduce their energy use
· Should be Diploma/BE/B.Tech (Electrical or Mechanical).
· MBA- Marketing can be an added advantage with 3-5 + years of sales/marketing experience.
· Having Good Technical knowledge..
· Having Excellent Communication and Presentation Skill
· Having Problem Solving Skill.
· Ready to Travel.
Leading three zones service heads for the smooth after sales work and site assembly of units per the scheduled defined by them.
Communication with the customers/clients of the ongoing sites to support the zone teams for smooth service calls at site.
Communications with service managers of all zones to get updated status of the job sites and for any issues prevailing which require support from superiors.
Weekly MIS from all zones to evaluate the work progress.
Online training to the teams and plan for classroom training depending upon the situation.
Define and implement contractor selection criteria meeting product quality standards.
Define the SOP to make mandatory the training of contractors’ assembly team at plant Rohad to follow the quality systems required during the assembly of units at site
Work with customers and team to provide technical support, resolve issues, and monitor to get site assembly operations with best quality.
Manage, develop, and lead HVAC service staff by recruiting, interviewing, hiring, training, and reviewing the performance of all staff employees.
Define the KRAs of the employees to gauge their performance periodically.
Maintain a well-trained team that is up to date on new technology, use tools and materials properly and provide each customer with quality workmanship.
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
4. OR (Order Request) issue & PO (Purchase Order) review for all major HVAC equipments like AHUs, MAUs, FCUs, CRAC UNITS, and SUPPLY & EXHAUST FANS. OR issue & PO review for Dampers, Sound Attenuators, Louvers, Grills and diffusers, valves, Gauges, chilled and condensor water piping & fittings.
5. Reviewing & Selection of AHU, FCU, Precision Cooling Units, Pumps, Valves and other equipment by reviewing quotes from different vendors.
1. Depth knowledge of laser cutting machine and its program.
2. Select proper cutting programs, and proper fixtures.
3. Knowledge of proper stop location, adjust laser beam focal point.
4. Perform prescribed maintenance as required in machine.
5. Can inspect of all parts dimensional.
6. Detect and report defective materials to reporting HOD.
7. Optimization of sheet utilization
8. Control & record the scrap generation
9. Scrap control form LASER
1.Identifying and developing business opportunities with new and existing customers by utilizing your product knowledge & applications experience in the HVAC market
2.Responsible for annual sales targets and sales growth
3.Ensures quality standards are maintained for both pre-sale and post-sale customer support and order fulfillment
4.Call on and build relationships with new and existing customers, contractors, engineering and architectural firms
5. Preparation of sales proposals, estimates and take offs
1.Identifying and developing business opportunities with new and existing customers by utilizing your product knowledge & applications experience in the HVAC market
2.Responsible for annual sales targets and sales growth
3.Ensures quality standards are maintained for both pre-sale and post-sale customer support and order fulfillment
4.Call on and build relationships with new and existing customers, contractors, engineering and architectural firms
5. Preparation of sales proposals, estimates and take offs
1.Planning the work to be done for the day as per approved and addressing it to the contractors.
2.Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
3.Quality check of the work done by the Labours and rectify the mistakes if found any.
4.Make sure that your workers are following proper safety measures.
5.you are going to be the medium between the client and the company so maintain proper relationship with clients.
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
4. OR (Order Request) issue & PO (Purchase Order) review for all major HVAC equipments like AHUs, MAUs, FCUs, CRAC UNITS, and SUPPLY & EXHAUST FANS. OR issue & PO review for Dampers, Sound Attenuators, Louvers, Grills and diffusers, valves, Gauges, chilled and condensor water piping & fittings.
5. Reviewing & Selection of AHU, FCU, Precision Cooling Units, Pumps, Valves and other equipment by reviewing quotes from different vendors.
Working As project in charge to look after all activities in HVAC project execution & including planning & monitoring activities as well as resolving execution difficulties.
Networking with Consultants, Architects, Contractors,ascertain technical specifications Construction related essentials,based on the prevalent rules And codes
Good educational background, preferably in the fields of engineering for HVAC Project
Proven working experience as a project administrator.
Surveying sites ahead of fitting heating, ventilation or air conditioning systems
Planning the placement of pipework, ducts and control panels
Installing HVAC components
Performing quality checks to ensure systems are working efficiently and safely
Carrying out maintenance on HVAC systems
Finding and fixing faults
Helping customers to reduce their energy use
Looking for CAD Draftsman who is having 1-2 years’ experience in the Mechanical / electrical / instrumentation / electronics domain. Selected engineers need to maintain project Drawings, Drafting the plans, Modifying & plotting of drawings, maintaining of complete site DOCS etc.
Looking for Project Engineers who are having 1-2 years’ experience in electrical / instrumentation / electronics domain. Selected engineers need to maintain project daily activities , planning of works , planning of resources , Studying & understanding drawings , cabling , maintaining of workforce .
1.Responsible for detailed engineering/ design calculation of HVAC works
2.Estimation of cooling loads, Air Distribution system design, Chilled water & Hot water Piping
Design
3.Field Equipment selection for HVAC System like AHU, FCU , Chiller, Pump, Cooling Tower &
Ventilation Unit.
4.To Prepare BOQ as per Tender or to prepare actual BOQ as compared to one received during
marketing stage.
5.To Cross check all design and get design approvals
6.Floating the Enquires for BOQ items
7.Preparing the quotations.
8.Tender preparation, Costing Estimation and bidding.
9.Techno-Commercial Negotiating, finalization of orders
10.Site visit
2+ years of hands down working in estimation with EXCEL knowledge
Vendor Liaison
Meeting Architects, PMCs, Consultants
Ability to understand and read the tender documents, specs, drawings
BE, BTech, Post diploma, Diploma qualification
Ability to converse in local language + English & Hindi – preferable
2+ years of hands down working in central plant products
Able to independently work
Should have analytical ability to analyses and troubleshoot
BE, BTech, Post diploma, Diploma qualification
Ability to converse in local language + English & Hindi – preferable
2+ years of hands down working in estimation with EXCEL knowledge
Vendor Liaison
Meeting Architects, PMCs, Consultants
Ability to understand and read the tender documents, specs, drawings
BE, BTech, Post diploma, Diploma qualification
Ability to converse in local language + English & Hindi – preferable
2+ years of hands down working in estimation with EXCEL knowledge
Able to independently work
Solicit enquiries from private sector and bid govt tenders
Ability to understand and read the tender documents, specs, drawings
BE, BTech, Post diploma, Diploma qualification
Ability to converse in local language + English & Hindi – pr
1.Preparing quotations upon receipt of enquiries.
2.Follow-up with customers on quotations.
3.Preparing submittals as per customer specifications.
4.Follow-up on projects and payments.
5.Recommending suitable products by understanding customer requirements
1.Planning the work to be done for the day as per approved and addressing it to the contractors.
2.Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
3.Quality check of the work done by the Labours and rectify the mistakes if found any.
4.Make sure that your workers are following proper safety measures.
5.you are going to be the medium between the client and the company so maintain proper relationship with clients
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
4. OR (Order Request) issue & PO (Purchase Order) review for all major HVAC equipments like AHUs, MAUs, FCUs, CRAC UNITS, and SUPPLY & EXHAUST FANS. OR issue & PO review for Dampers, Sound Attenuators, Louvers, Grills and diffusers, valves, Gauges, chilled and condensor water piping & fittings.
5. Reviewing & Selection of AHU, FCU, Precision Cooling Units, Pumps, Valves and other equipment by reviewing quotes from different vendors.
1.Planning the work to be done for the day as per approved and addressing it to the contractors.
2.Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
3.Quality check of the work done by the Labours and rectify the mistakes if found any.
4.Make sure that your workers are following proper safety measures.
5.you are going to be the medium between the client and the company so maintain proper relationship with clients
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
4.Planning the work to be done for the day as per approved and addressing it to the contractors.
5.Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team
1.Planning the work to be done for the day as per approved and addressing it to the contractors.
2.Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
3.Quality check of the work done by the Labours and rectify the mistakes if found any.
4.Make sure that your workers are following proper safety measures.
5.you are going to be the medium between the client and the company so maintain proper relationship with clients.
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
4. OR (Order Request) issue & PO (Purchase Order) review for all major HVAC equipments like AHUs, MAUs, FCUs, CRAC UNITS, and SUPPLY & EXHAUST FANS. OR issue & PO review for Dampers, Sound Attenuators, Louvers, Grills and diffusers, valves, Gauges, chilled and condensor water piping & fittings.
5. Reviewing & Selection of AHU, FCU, Precision Cooling Units, Pumps, Valves and other equipment by reviewing quotes from different vendors.
Planning the work to be done for the day as per approved and addressing it to the contractors.
Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
Quality check of the work done by the Labours and rectify the mistakes if found any.
Make sure that your workers are following proper safety measures.
you are going to be the medium between the client and the company so maintain proper relationship with clients.
Planning the work to be done for the day as per approved and addressing it to the contractors.
Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
Quality check of the work done by the Labours and rectify the mistakes if found any.
Make sure that your workers are following proper safety measures.
you are going to be the medium between the client and the company so maintain proper relationship with clients
Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
1.Planning the work to be done for the day as per approved and addressing it to the contractors.
2.Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
3.Quality check of the work done by the Labours and rectify the mistakes if found any.
4.Make sure that your workers are following proper safety measures.
5.you are going to be the medium between the client and the company so maintain proper relationship with clients.
1.Identifying and developing business opportunities with new and existing customers by utilizing your product knowledge & applications experience in the HVAC market
2.Responsible for annual sales targets and sales growth
3.Ensures quality standards are maintained for both pre-sale and post-sale customer support and order fulfillment
4.Call on and build relationships with new and existing customers, contractors, engineering and architectural firms
5. Preparation of sales proposals, estimates and take offs
1. Estimating Heat loads and preparing of HVAC design drawings.
2. Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
3 Coordinate among all services without clashes.
4. OR (Order Request) issue & PO (Purchase Order) review for all major HVAC equipments like AHUs, MAUs, FCUs, CRAC UNITS, and SUPPLY & EXHAUST FANS. OR issue & PO review for Dampers, Sound Attenuators, Louvers, Grills and diffusers, valves, Gauges, chilled and condensor water piping & fittings.
5. Reviewing & Selection of AHU, FCU, Precision Cooling Units, Pumps, Valves and other equipment by reviewing quotes from different vendors.
1.Identifying and developing business opportunities with new and existing customers by utilizing your product knowledge & applications experience in the HVAC market
2.Responsible for annual sales targets and sales growth
3.Ensures quality standards are maintained for both pre-sale and post-sale customer support and order fulfillment
4.Call on and build relationships with new and existing customers, contractors, engineering and architectural firms
5. Preparation of sales proposals, estimates and take offs
1. Mainly handling AC commercial and residential products like Split AC, VRF Systems and Ductable AC
2. Analyze potential markets and sectors. Generate new business by prospecting and identifying potential
customers
3. Visiting under construction commercial, office space, Retail showroom and residential buildings and
gathering details and understanding of the customer needs.
4. Meeting with Architect for their requirement and explore our Company credentials and product to them.
5. Having good communication skill in English and local language and knowledge on AC subject.
• Maintaining job records along with all related drawings/documents
Should know Heat load calculations, HVAC design formulas, metric calculations & quantities estimation
• Should know HVAC Design & HVAC AutoCAD drafting
• Should have HVAC system, standards & design software knowledge (Heat load calculations, System
Selection, Equipment selection, Schematic drawings, Single line diagrams, ASHRAE, Duct sizer, pipe sizer,
Static pressure calculations, Etc.)
• Should read & have understanding of different types of layouts & plans
1.To review and manage the customers enquiry process into a cost workable solution.
2. Study Customer Enquiry and Prepare Technical Bid
3.To submit a detailed response to the enquiry documentation and provide answers/responses to any subsequent request for clarification.
4.Prepare Bill of material extract from the enquiry specification/SLD.
5.Prepare Bill of material costing.
6.Costing for Panel, busbar, wiring & packing.
7.Quotation preparation.
8. Follow-ups orders with customer & post order activities.
9. Documentation & presale support.
10.Prepare the Commercial offer & further negotiation in winning the bid.
1.To review and manage the customers enquiry process into a cost workable solution.
2. Study Customer Enquiry and Prepare Technical Bid
3.To submit a detailed response to the enquiry documentation and provide answers/responses to any subsequent request for clarification.
4.Prepare Bill of material extract from the enquiry specification/SLD.
5.Prepare Bill of material costing.
6.Costing for Panel, busbar, wiring & packing.
7.Quotation preparation.
8. Follow-ups orders with customer & post order activities.
9. Documentation & presale support.
10.Prepare the Commercial offer & further negotiation in winning the bid.
• HEATLOAD CALCULATIONS (CUSTOM SOFTWARE WHICH WILL REQUIRE SOME TRAINING)
• AUTOCAD DRAWING OF AHU AND COIL DESIGNS / DUCTING
• QUALITY CHECKS OF MANUFACTURED UNITS AND DOCUMENTATION CREATION (DQ/IQ/OQ)
The Role of Plumbing Design Engineer is to Perform Following Activities
-Taking the Scope of Client and His Requirements
- Performing Design Related to
1. Water supply system
2. Seewage System
3. Rain Water Harvesting
Estimating Heat loads and preparing of HVAC design drawings.
Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
Coordinate among all services without clashes.
OR (Order Request) issue & PO (Purchase Order) review for all major HVAC equipments like AHUs, MAUs, FCUs, CRAC UNITS, and SUPPLY & EXHAUST FANS. OR issue & PO review for Dampers, Sound Attenuators, Louvers, Grills and diffusers, valves, Gauges, chilled and condensor water piping & fittings.
5. Reviewing & Selection of AHU, FCU, Precision Cooling Units, Pumps, Valves and other equipment by reviewing quotes from different vendors.
Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
Planning the work to be done for the day as per approved and addressing it to the contractors.
Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
Quality check of the work done by the Labours and rectify the mistakes if found any.
Make sure that your workers are following proper safety measures.
you are going to be the medium between the client and the company so maintain proper relationship with clients.
Planning the work to be done for the day as per approved and addressing it to the contractors.
Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
Quality check of the work done by the Labours and rectify the mistakes if found any.
Make sure that your workers are following proper safety measures.
you are going to be the medium between the client and the company so maintain proper relationship with clients.
Prepare accurate cad drawings from hand sketches, catalogue data, approval and structural data.
Collaborate and work with project managers, design managers and seniors to generate design drawings, working drawings, presentation drawings and any other type of drawings / specifications that the project may require.
Seek clarity before starting tasks and to complete the drawings seamlessly and accurately.
To ensure deliverables as per schedule with exceptional work quality.
Support team to through all phases of the project from inception to completion.
Identifying and developing business opportunities with new and existing customers by utilizing your product knowledge & applications experience in the HVAC market
Responsible for annual sales targets and sales growth
Ensures quality standards are maintained for both pre-sale and post-sale customer support and order fulfillment
Develop sales leads, qualify prospects and make sales calls. They perform site surveys, estimate, prepare and propose consultative sales solutions to meet the customer’s needs. Project Sales Manager / Engineer will negotiate, estimate, bid, propose and close contracts at qualified margins
Develop sales leads, qualify prospects and make sales calls. They
perform site surveys, estimate, prepare and propose consultative sales solutions to meet
the customer’s needs. Project Sales Manager / Engineer will negotiate, estimate, bid,
propose and close contracts at qualified margins
Job profile constitutes of basic and detailed engineering of HVAC systems, Cross-checking the Design for the Final Installation, Estimating the Work, Planning the activities within time limits, maintaining log of activities and ensuring them to meet planned completion, Cost Control by effective use of Material and Man-power. Commissioning, Testing and Balancing of Both Water and Air Side for AHUs, FCUs, DX, VRV/VRF etc.
Responsibilities of Procurement Engineers (Mechanical / Electrical /
MEP) includes: To procure equipment, materials & systems complying to project Quality
and Specification requirements.
Surveying sites ahead of fitting heating, ventilation or air conditioning
systems. Planning the placement of pipework, ducts and control panels. Installing HVAC
components
Estimating Heat loads and preparing of HVAC design drawings.
Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
Coordinate among all services without clashes.
Engineer will be posted in Design, Engineering and Sales Department at our Mumbai Head Office located at Andheri ( East). The company offers excellent growth prospects to the
candidates who are willing to take independent responsibilities as project In charge
HVAC design and execution knowledge
· Auto cad and HVAC heat load software user friendly
· MS Office user friendly
· Fluency in communication
· Ready to work on field as per project location (Currently Pune Location)
· Adaptable to work under pressure on site if any
. Qualification: BE Mechanical – Overall First Class
. Experience: 0-1 years
. Location: Pune, for project it may be pan India
-Detail Estimation and evaluation of complete project.
-Designing of duct,chilled water piping,refrigerant piping
- Work Schedule of all HVAC related works
- Attending client and coordination meetings.
- Final approval of quotation and suppliers as per specification.
- Solving the technical issues at site.
Supervise construction activities: The site supervisor oversees all construction activities on site, including managing construction crews, coordinating with subcontractors, and ensuring that work is completed on time and according to specifications.​
Monitor progress: The site supervisor monitors project progress, identifies potential issues or delays, and takes corrective action to keep projects on track. Ensure safety: The site supervisor ensures that all construction activities are conducted safely, adhering to safety regulations and guidelines, and implementing safety procedures to prevent accidents and injuries.
Create technical drawings: The HVAC draftsman uses computer-aided design (CAD) software to create technical drawings and schematics for HVAC systems, including ductwork, piping, and equipment layouts.​
Ensure accuracy: The HVAC draftsman reviews and verifies design specifications, codes, and standards to ensure that technical drawings are accurate and meet project requirements.​
Collaborate with engineers: The HVAC draftsman works closely with HVAC engineers to review design drawings, make changes as necessary, and ensure that HVAC systems are designed and installed correctly.
Maintenance electricians are responsible for the general upkeep of a building's electrical system. They are required to inspect the premises regularly, conduct routine maintenance, perform repairs, and fix faulty wiring when necessary. They may also be required to replace electrical appliances in the building
Assists in a variety of topics including developing procedures, improved design recommendations or new or better equipment purchase recommendations
Controlling the main power systems that supply site manufacturing, buildings and offices the distribution circuits to each area
Estimating Heat loads and preparing of HVAC design drawings.
Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
Coordinate among all services without clashes.
OR (Order Request) issue & PO (Purchase Order) review for all major HVAC equipments like AHUs, MAUs, FCUs, CRAC UNITS, and SUPPLY & EXHAUST FANS. OR issue & PO review for Dampers, Sound Attenuators, Louvers, Grills and diffusers, valves, Gauges, chilled and condensor water piping & fittings.
Reviewing & Selection of AHU, FCU, Precision Cooling Units, Pumps, Valves and other equipment by reviewing quotes from different vendors
Assists in a variety of topics including developing procedures, improved design recommendations or new or better equipment purchase recommendations
Controlling the main power systems that supply site manufacturing, buildings and offices the distribution circuits to each area
Planning the work to be done for the day as per approved and addressing it to the contractors.
Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
Quality check of the work done by the Labours and rectify the mistakes if found any.
Make sure that your workers are following proper safety measures.
you are going to be the medium between the client and the company so maintain proper relationship with clients.
Identifying and developing business opportunities with new and existing customers by utilizing your product knowledge & applications experience in the HVAC market
Responsible for annual sales targets and sales growth
Ensures quality standards are maintained for both pre-sale and post-sale customer support and order fulfillment
Call on and build relationships with new and existing customers, contractors, engineering and architectural firms
Preparation of sales proposals, estimates and take offs
Partner with sales executives to plan, prepare and execute on strategic deals in complex sales cycles
Estimating Heat loads and preparing of HVAC design drawings.
Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
Coordinate among all services without clashes.
OR (Order Request) issue & PO (Purchase Order) review for all major HVAC equipments like AHUs, MAUs, FCUs, CRAC UNITS, and SUPPLY & EXHAUST FANS. OR issue & PO review for Dampers, Sound Attenuators, Louvers, Grills and diffusers, valves, Gauges, chilled and condensor water piping & fittings.
Enquiry Generation through Customer visits, participation in Exhibitions, interacting with Industry
personnel
Responding to Enquiries received through phone, email, customer referrals, industry referrals
Submission of Techno – Commercial Offer
Demonstration of the Tools & Machines at Customers premises or in the office
Following up with Customer by Phone, Email and Direct Visit
Negotiation & finalization of Orders
Submission of Proforma Invoice & Receiving Purchase Order
Ensuring the Material ordered by the Customer is delivered to them as agreed
Payment & C – Form Collection
Responding to Customer complaints
Providing Operation & Maintenance Training to the Customer/his operators
Submitting Daily Reports to the Management
Make sure that your workers are following proper safety measures.
You are going to be the medium between the client and the company so maintain proper relationship with clients.
Attend site meetings, review meetings and share any issues you have at site.
Send reports,labour attendance, labour records etc
Planning the work to be done for the day as per approved and addressing it to the contractors.
Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
Quality check of the work done by the Labours and rectify the mistakes if found any.
Make sure that your workers are following proper safety measures.
you are going to be the medium between the client and the company so maintain proper relationship with clients.
Assist with installations: The AC helper assists the AC technician with the installation of air conditioning systems, including carrying equipment and materials, running ductwork, and connecting electrical components.
Prepare job sites: The AC helper prepares job sites for installations and repairs, including removing old equipment, cleaning work areas, and ensuring that tools and equipment are in good working condition.
Clean and maintain equipment: The AC helper cleans and maintains equipment, such as air conditioning units, ductwork, and filters, to ensure optimal performance and efficiency.
Install air conditioning systems: The AC technician installs air conditioning systems, including ductwork, piping, and electrical components, following manufacturer specifications and local codes.
Repair and maintain systems: The AC technician diagnoses and repairs air conditioning systems that are not functioning properly, including replacing faulty components and recharging refrigerant.
Perform preventative maintenance: The AC technician performs preventative maintenance on air conditioning systems, including cleaning coils, checking
refrigerant levels, and replacing filters, to ensure optimal performance and efficiency.
Identify leads: The salesperson identifies potential customers and generates leads through various channels, such as cold calling, networking, and referrals.
Build relationships: The salesperson builds relationships with clients and provided exceptional customer service to ensure repeat business and referrals.
Conduct sales activities: The salesperson conducts sales activities, including product presentations, demonstrations, and negotiations, to close deals and meet sales targets.
Develop sales strategies: The salesperson develops sales strategies and tactics to achieve sales goals, including identifying new markets and customers and developing promotional activities.
Review project requirements: The estimation engineer reviews project requirements, including design specifications, plans, and scope of work, to understand the project's goals, timelines, and budget.
Develop cost estimates: The estimation engineer develops cost estimates for the project, including labor, materials, equipment, and other expenses, using cost estimating software and industry standards.
Prepare proposals: The estimation engineer prepares proposals based on the cost estimates, including detailed cost breakdowns, project timelines, and any additional information required by clients
Estimating Heat loads and preparing of HVAC design drawings.
Preparing the shop drawings of all MECHANICAL services including Detail and Section drawings to make easy for installation in the site.
Coordinate among all services without clashes.
Identifying and developing business opportunities with new and existing customers by utilizing your product knowledge & applications experience in the HVAC market
Responsible for annual sales targets and sales growth
Ensures quality standards are maintained for both pre-sale and post-sale customer support and order fulfillment
Manage all technical aspects of RFP / RFI responses
Effectively communicate client needs to the RD teams for future product enhancements
Collect and document competitive intelligence
Direct Sales skill
Corporate sales skill
Lead Management skill
Identifying and developing business opportunities with new and existing customers by utilizing your product knowledge & applications experience in the HVAC market
Responsible for annual sales targets and sales growth
Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
1.Planning the work to be done for the day as per approved and addressing it to the contractors.
2.Maintain record of materials received and used. The materials required in the coming days for work, and following it with the purchase team.
3.Quality check of the work done by the Labours and rectify the mistakes if found any.
Should be well versed in designing of HVAC including Heat Load
Calculation, Duct Design, Chilled Water Design, etc. The engineer should also be able to
coordinate with customer for approvals of submitted design.
Site Engineer will be stationed at the Project Location and will be responsible for managing
the execution team, coordinating with Clients Site team, managing material at the site etc.
Should have working knowledge on AutoCAD.
Knowledge in designing Electrical distribution such as designing Internal lighting systems, power systems, ups systems etc.
Preparation of Lighting, Earthing, Power & Cable Tray Layouts, Substation Equipment Layout.
Preparation of Single Line Diagrams.
Good written and verbal communication.
Should have working knowledge on AutoCAD.
Knowledge in designing Electrical distribution such as designing Internal lighting systems, power systems, ups systems etc.
Preparation of Lighting, Earthing, Power & Cable Tray Layouts, Substation Equipment Layout.
Preparation of Single Line Diagrams.
Good written and verbal communication.
QUALIFIED ELECTRICIAN Reports to: Manager Position Summary: The Electrician is responsible for performing skilled electrical work in the installation, alteration, maintenance, and repair of electrical systems, equipment, and fixtures in accordance with AS/NZS Electrical standards. Essential Duties and Responsibilities: ? Installs, alters, maintains, and repairs electrical wiring systems and equipment, both high and low voltage, air distributions systems, pumps, transformers, motors, and appliances. ? Understands electrical plans for new home builds, commercial building and electrical equipment. ? Draws circuits on a diagram for controls.
Job Description:
2 years experience in HVAC design & drafting.
Willingness to learn the HVAC Design & Hands on experiencein AutoCAD.
HVAC drawings preparation and shall be able to handle the complete HVAC drafting for entire project independently with Quality from day one with minimal guidance.
Shall be able to visit sites in and around Hyderabad.
Ø Proficiency in Revit and AutoCAD is must
Ø Project set-up across all disciplines (based on requirement of different discipline)
Ø Knowledge of Revit Family creation/modifications
Ø Knowledge about BIM360
Ø Navisworks clash detection and co-ordination
Ø Working experience with US clients is a plus point
Ø Knowledge of MEP modelling - Basic understanding of all disciplines will be an added advantage
Ø Good verbal and written communication skill in English
Ø Knowledge of MS Office.
Ø Proficiency in Revit, AutoCAD and Bluebeam.
Ø Capable of doing the piping layouts for Cold water, Hot water, Hot water return, waste, vent, fuel gas and fire protection systems and provide a detailed technical drawing of it along with all necessary detail and specifications with confirms to the local codes, standards and client requirements.
Ø Preparation of Plumbing equipment Room Layout with necessary clearance requirements.
Ø Having working knowledge of local and international plumbing code requirements (ASPE, CPC, UPC, IBC, NFPA etc.)
Ø Having experience interfacing with various consultants for design coordination.
Ø To prepare checklist/action plan to reduce the design, drafting or modelling errors in drawing.
Ø Experience in doing all kind of plumbing design calculations, Fixture and equipment selections will be added advantage.
Ø Excellent problem-solving skills;
Ø Should have technical knowledge of the MEP design and Execution.
Ø Proficiency in Revit & AutoCAD Software
Ø Candidate should be meticulous and have exceptional attention to detail.
Ø Candidate should be able to communicate fluently in English (both verbal and written)
Ø Planning and executing mechanical designs using CAD, CAM, and 3D CAD programs.
Ø Liaising with clients, designers, engineers, and manufacturers to ensure coherence.
Ø Keeping abreast of the latest advancements in technology, design trends, and engineering best practices
Ø Proficiency in Revit and AutoCAD
Ø 2 to 5 experienced as an Electrical Design Engineer in MEP (Mechanical, Electrical & Plumbing) field, should have a basic knowledge of Architecture field.
Ø Understanding of Electrical Design, Short circuit & voltage drop calculations, power distribution.
Ø Experience on Microsoft office and tools.
Ø Good communication skills in English Language in oral and written form.
Ø Experienced in US projects preferred.
Ø Demonstrated team building skills, would be a preference.
Hi, I m Wasiuddin I would like to express my journey in Dhanush Engg. Services .It Is one of the specific and relevant institute like most ambiance institute.When I joined this institute i m totally unknown about HVAC but now Im fully confident about HVAC whatever i learned not only HVAC course but also about resumes making and Interviews . It is one of the reputed institute that we can trust blindly and we can learn more more things by theoratical also practical. Thanking You!
Mohammed Wasiuddin
hi friend am very happy to inform that i got placed in span consultant as electrical engineer in Bangalore thank you giving this opportunity to prove my skills and my knowledge in electrical background. so i suggest to join in this institute for bright future in engineering
Golla Vivek Rohith Y
Hai friends. i have placed in sygnovate it solutions ltd, hyderabad as a electrical designer. i passed my B.TECH in electrical from amrita sai institute in kanchikacherla. dhanush engg services really helps to get a job.
Chakka Sateesh Kumar
I had completed MEP course from Dhanush enggservices. The guidance provided by the mentors and the HR team is fruitful and the assurance of 100% placement is also true on their part.I feel proud to share that i am placed as an MEP engineer in Sustainable solutions and services. So friends Dhanush is a place where u can gain ur knowledge.
Saladi Hemanth Bala
MEP center gave me the best knowledge about electrical designing and drafting skills. They provide placement training which is awesome, I can realize that what are all the things and capacity I have. I have built my best career by doing designing course in MEP centre.
Mekala Govindraju
M.E.P DHANUSH is one of the best institute for hvac design and drafting course. Teaching standard is much more better than any other institute in India for this course. Best of luck.
Rakesh Das
I think it is the one of the good institute for training of HVAC design, and it helped me to get a job.
Udaya Bhaskar Kotha
Faculty members are very co-operative and having excellent knowledge. Good study environment for all the students with or without laptops. Job promising institute. Thanks Regards Wasif
Md. Wasif Rabbani
I am so happy to have joined Dhanush EnggServices India Pvt Ltd as they have very good teaching approach, good faculties and very good facilities overall. Its very good place to know what engineering is. Thank you
Mohsin Raza
Electrical designing course in Dhanush Engg Service is useful to electrical students. In the institute all lecturers are friendly in nature and the explanation is also good.
Duggirala Harisha
Excellent teaching and learned more knowledge and more new concepts. Every fresher should get knowledge from here.
Tappita Moshe Dayan
Nice experience with Dhanush Engg Services. I have learnt many things like - HVAC calculation, criteria, reason behind the use system or equipment, which I didn't get in any company.
Zafar Iqbal Khan
Excellent teaching and good interaction between students especially this institute is very helpful to fresher students and finally learned more knowledge.
Pitta Sparjan
Teaching is very good. They are providing good lab facilities and HR classes also are good. We can get more knowledge.
Satya Venkataprasad
My experience in the institute is really good. I have learnt so much from the faculty with respect to HVAC Design and Drafting and he will always be available for help. Whatever the concepts will be there in the field and doubts have been cleared by faculty.
Maner Nabil Iqbal
I am learning Electrical Designing and Drafting course in MEP centre, Thrissur. I am fresher and just pass out of college. Here I have good knowledge in practical scenario regarding Designing and Drafting. Thanks to faculty for their excellent teaching and I would convey my thanks to MEP management for giving such an experienced faculty.
Akhil C S
I suggest everyone interested in MEP to join Dhanush MEP Centre...it is one of the best MEP Centre in India where you can learn all basics also. The faculty here is very excellent and skilled. I even got placement from Dhanush MEP Centre as soon as I finished my course.
Abdul Salman
It's a good institute for learning HVAC Design & Drafting Course amongst all available Institutes. I am feel good to come here & join this because before joining Dhanush I was working in power plant & I want to change my line from plant to field. It's a very good practical training for me............. I am always in touch with Dhanush and about my Faculty..I have no words..... Just awesome. That's it.
Rakesh Bhati
I did Electrical Designing and drafting course from MEP Centre, Thrissur Branch Kerala. I have gained good knowledge in the classroom sessions and it was very helpful in understanding practically. Doubts are very well clarified by the faculty. I am very well satisfied by way of teaching given by the faculty.
Karthik Goud B
I have learnt Electrical Design and Drafting course from Dhanush EnggServices India Pvt Ltd. The course of Electrical Designing and Drafting is good. The faculty teaching is also good. I request you to make more Site Visits for the students so that they can learn more and get more exposure to practical knowledge.
Rahul N Chitte
Dhanush is good for Electrical Design and Drafting Course. Faculties also guide the students well. Electrical calculation part totally covered by this Institute. Coming to the project, guidance is very good. Overall from this institute I have learnt lot of things regarding Electrical Design, how to calculate the sizes of the cable, t/f, motors etc.
Umesh
I have learnt lot of things about Electrical Design and Drafting from Dhanush Institute. The faculty is good and helped me a lot while clarifying my doubts and helped me to improve the job orientation skills.
Tumu Kedarnadh
Dhanush EnggServices India Pvt Ltd is very good regarding Electrical Design and Drafting. Faculty's teaching is good and gave proper guidance to complete project. Learning environment in this Institute is very nice.
Madhu Bhaskar Reddy
Dhanush EnggServices is one of the best institutions providing quality training. The faculty over here is highly qualified with vast experience, the class environment is good to study and explore. The labs are of modern standards and complete guidance is provided by the faculty. Along with the training program we are also provided placement assistance which is very helpful for me as well as for all the students.
Pintu Singh
I have done HVAC course in Dhanush Institute. I learnt lot of things about HVAC even from basics to end point. The faculty is teaching very well. They are clarifying doubts without any hesitation. Overall Dhanush is very good Institute.
Venkadesan.G
I have learnt HVAC Course from Dhanush Engg Services India Pvt Ltd. Actually I don`t know anything about refrigeration and things related to that.... but I learnt lot of things after joining this institute. And also from HR, I got to know many things about interviews.... how to look, how to to behave, how to express and all these things.... I suggest you to conduct more mock interviews to know how much we improved.... Thank you
Vandanau Vijay Kumar
The class is price worthy with very good faculty for Electrical Design and Drafting. I have made my Electrical engineering basics solid with very good electrical designing classes. All useful and very important topics are covered in these classes. I am happy and satisfied with Dhanush Engg Services India Pvt Ltd.
Ahamad Bilal
Dhanush is a very good institute for freshers to understand practical application of theoretical knowledge what we have learned in BE/B Tech. Faculties are good, infrastructure need to be upgraded and fresher can surely join and get useful knowledge for interview.
Nobojyoti Das
This Electrical Designing course is very much helpful for freshers who want to make a career in electrical sector. After learning this course, they can work as a maintenance engineer or work as a design engineer. Overall Dhanush Engg Services is a really good Institute.
B.Sai Babu
Dhanush is a good institute to enhance your knowledge in MEP HVAC as they provide well structured syllabus including projects so that students can learn easily in a professional manner. They have very good and cooperative faculties, great atmosphere for learning.
Krishn Kant Shukla
For HVAC course Dhanush is a very good institute where faculties are very knowledgeable and cooperative. After completion of the course, I am feeling very confident in this field.
Hafeez Ur Rehman
I have learnt HVAC design and drafting course in Dhanush. I have learnt a lot of things about HVAC and after completion of the course I am very much confident of handling things in HVAC field. This is the best Institute in MEP field. They also provide placements PAN India.
Mohammad Quaisar Rez
I appreciate the entire HVAC Design and Drafting Course at Dhanush MEP Centre, excellent for freshers as well as experienced people to start career in HVAC designer in domestic as well as commercial market.
Md Khurshid Alam
I have learnt HVAC Design and Drafting Course from Dhanush. Faculties are very good, completed course well on time and project work was challenging. Got a thorough knowledge about the HVAC industry and fees are also not very high.
Sreejith Babu
I have learnt Electrical Design and Drafting from Dhanush EnggServices India Pvt Ltd which I feel is the best institute for Electrical Designing and Drafting in India. Friends, if you need to gain knowledge in electrical designing, these guys can help you for sure. It is suggested to have more site visits for knowing things practically.
Kiran Kishore
I did Electrical Design and Drafting from Dhanush. I gained lot of knowledge in this field from this Institute. I suggest everyone to do this course from Dhanush so that u can gain good knowledge.
Sonulal Kushwaha
I have done Electrical Designing and Drafting course at Dhanush Engg Services. The curriculum here is according to market requirement. Faculty is well experienced and student friendly. Well supportive HR Team by providing soft skill development and make us Interview ready. This is the best institute to start your career with.
M Jagannadha Reddy
Dhanush Engg Services India Pvt ltd is a very good training Institute for Electrical Designing and Drafting. Faculties teaching and explanation is very good.
Ganji Shiva Kumar
Dhanush EnggServices India Pvt Ltd is a good institute to learn Electrical design course and here all faculties are very good. They respond to students very promptly treat us in a friendly manner.
Raghavendra Shetty B
I have done Electrical Design and Drafting course from Dhanush EnggServices India Pvt Ltd. Faculties are very nice and have good knowledge. They made us understand in an easy and practical way.
Sana Nagraj
As a student of dhanush it is the best institute in the field of HVAC design and drafting. Mode of teaching can be more advanced. But for industrial knowledge and career it is the best ......
Dipu Singh
I have done a course HVAC Design and Drafting and this center is good and the best point is they assist the students with 100% placement after the completion project work .
Jawed Alam
It was a good experience here in Dhanush. Faculty and teaching method is good. Good Going!!
Meraj Ahmad Ansari
As a student of Dhanush I can say Dhanush is the best in the business. Faculties are good. They work hard with the students. The special thing about Dhanush is the way of teaching. It makes tough topics looks easy. The only thing needs to be better is Infrastructure-
Mohammad Anas
I have done Electrical Design course ,the faculty is good. They also encourage students with passion of teaching by giving them a career opportunity with Dhanush EnggServices Pvt Ltd,. Itself
Parvez Alam
As a student of Dhanush Institute, truly speaking, it is a perfect place to learn MEP studies. Faculty of this institute makes every effort to teach and to make their students perfect. Many of the students of this institute are placed in various reputed companies.
Rahul Deep
Dhanush EnggServices have the Best lot of faculties, they are very helpful , approachable and also knowledgeable in the concepts.
Sunil Kumar Yadav
Best industrial training institute for HVAC ,Electrical and plumbing designing
Vimal Kumar
I trained in DHANUSH MEP TRAINING CENTRE (New Delhi), HVAC design and drafting course is the best. Now, I am working as a site engineer Bluestar, so anyone who is not placed yet, go and join MEP Centre today. On other hand, I owe my success to my faculty; he is very helping be it in classroom or during project.
Mohd Khalid
Electrical design and drafting course is helpful for both Diploma/B.Tech. I have completed Diploma in Electrical Engineering after that I joined this institute for design and drafting. This institute is very good and all the faculties are very good, helpful in nature. This course improved my strength in engineering.
Ashish Kumar Sharma
Great teaching excellent staffs , have gained a lot of knowledge from the institute.
Chougle Abdul Basit
It was a good experience to be here .After the Electrical design & drafting course I feel more confident regarding my field and the faculties are very good.
Girish Kashyap
I have done the Electrical Design and Drafting course in Dhanush EnggServices India pvt ltd. This is the best institute for Electrical Design. They gave us extensive practice to face an interview and also gave a 100 % placement assistance
Janmenjaya Jena
According to me it’s the best place for Eng. course like HVAC ,Electrical etc, Faculties are best.
Krushna Chandra Dash
Dhanush EnggServices pvt ltd is the right place to learn the Design and drafting of M.E.P Services.
Manigandan K
It is a good training for me in HVAC D&D for getting knowledge about the working of Refrigeration and Air Conditioning by this institute. Faculty is also good at explaining while teaching, and also clarifying the doubts in subject. I feel very good about Dhanush Engg.. services.
Shaik Khaleel
It's a good institute for gaining technical knowledge about HVAC & good opportunity for mechanical engineers who are freshers and faculty teaching is also very good.
M Noor Basha
Good institute. provides sufficient knowledge.
Ch Prudhvi
The training provided here is excellent and a good place for learning especially for freshers.The trainers are well qualified and they share their knowledge.
Kasukurthi Surendra
It's a best institute to get start your career,faculties are fantastic ,for HVAC it's the best institute to get good education for your career, it gives best education in hvac as well as in soft skills and after completing your course it provides you placement offer too.
Sunil Kumar Panigrah
Course timing or month should be increased on regular.
Altop Rahman
In this HVAC class i enjoyed lot mam is good and I understood all the things easily.
Raghib Rehan
This institute is good this course is very useful for our future.
Vamsiprakash
It is good institute for design field, faculty is very good.
Shahnawaz Akther
My Dhanush Tutorial is a very good help to me and the same time our facilities teaching is also good. I thank Dhanush.
Sk Musthafa
I am so happy to join here because I learned a lot from this institute comparing with my b.tech education.communication between student and faculty is good.
G.pradeep Kumar
Its good to join HVAC, it has shown me a platform to start my career and the environment around me and faculty are really good. Their experience as let me the HVAC live project was going good. But for fresher point of view its a good platform to succeed in the rising career.
G H Manjunath
I`am happy with dhanush institute where I completed my Hvac and now I am confident to get a job than 4 yrs I studied in my btech.
Tanaji
I attended for HVAC designing and drafting course here, which was a good experience and they are good at technical presentation with highly experienced faculty.
G Nanda Kishore
I have done HVAC design and drafting course here. All the concepts are explained very clearly and doing the project gives us more knowledge and experience.
Ferhan Rasool
I suggest DHANSUH for HVAC course.I have done HVAC design and drafting course in this institute and the explanation was very good.By doing a live project we can gain real time experience.
Mohammed Waseem Ahme
Teaching is good and way of communicating to students in different languages is also good.
Rahul
Good faculty easy to learn subject and improve the knowledge and communication skills very will improved going for a job best way of choosing.
Santhosh
Faculty is good to teach, their communication is fair, knowledge regarding subject is good, please visit any place in practical which have done in class.
Nagesh Poludasari
Excellent teaching , will say us to how to do our work in simple and easy manner
K.Rajesh
It is Excellent teaching and goods for talent students
Malhari
Excellent teaching and good course material
Sagar
Coursework was nicely delivered in class and faculty have very helpful nature,satisfied with Dhanush HVAC training.
Kaushik
Its a good career development centre the faculties are good and helpful.
Vidhun
Experience in Dhanush engg services was quite good.It provided a lot of learning exposure which helped me to tackle many self emerged questions.Institute has always encouraged students to work hard and be gentle. Thank you.
Abhishek Kumar
I completed Diploma and after that I joined here as a good view of my future. This institute is good for courses of M.E.P and here the faculty is good and experienced. I really thank this faculty as they gave good knowledge for my electrical course. Overall it is good for my future, thanks to all the staff.
M.vinodkumar
Very good institute to learn skills, it is helpful for our core branch.
K.ChandraSekharReddy
Good teaching staff and quality learning than any other institute in Hyderabad.
Himanshu
Good teaching staff and quality learning.
Sumit Dnyaneshwar Ma
Dhanush engg services institute is the best opportunities for electrical students well experience faculty.
Rangamuni
Good care towards students. I improved my skills.
Raja
Dhanush Engineering Services Pvt. Ltd. is one of the best institute for the Electrical Designing & Drafting. In this Institute experienced faculties are teaching lots of students for their future. I have got excellence skill from this Institute.My suggestion if you want to go for Electrical Designing or HVAC then prefer this Institute.
Naveen Kumar Sahu
DHANUSH Engg. Services Pvt. Ltd is one of the best for providing a quality and advanced training in Electrical Designing . The faculty here is technically sound and have good presentation skills and helping nature.
Mohd Inzamam Uddin
In Hyderabad there are so many institute,but believe me this institute is the best for the Electrical Designing & draftingCourse.Recently I Just completed it. & I know how much it's beneficial for me.Guys If you want to do the Electrical Design Course then just come to Dhanush Institute Hyderabad.
Sambit Mohanty
This is a good institute for learning a Electrical Design and drafting . The faculty also is very good.